Dear All,
I am using three no's of GV-5260 CP color camera in VQ4-GE framegrabber installed with SISO runtime v5.6.0 for my applet and the cameras are triggered seperately by framegrabber at 500 FPS. Now I am facing an issue where if any one of cameras are either powered off or trigger is not receiving then both the microdisplay and genicam explorer exits(crashing) without any warning. Here I have attached my sample image acquisition applet for your reference. Please suggest me a solution.
ImageAcquisition_CameraFailCase_v1.0.va
Note:- I ran the sample "QuadAreaBayer24" hap file provided in siso directory , there if I remove any particular camera (testing purpose) from the frame grabber the microdisplay is not crashing instead the corresponding DMA turns out to be in red color and acquisition stops.
Thanks,
Jayasuriya