I am using three no's of GV-5260 CP color camera in VQ4-GE framegrabber installed with SISO runtime v5.6.0 for my applet and the cameras are triggered seperately by framegrabber at 500 FPS. Now I am facing an issue where if any one of cameras are either powered off or trigger is not receiving then both the microdisplay and genicam explorer exits(crashing) without any warning. Here I have attached my sample image acquisition applet for your reference. Please suggest me a solution.
Note:- I ran the sample "QuadAreaBayer24" hap file provided in siso directory , there if I remove any particular camera (testing purpose) from the frame grabber the microdisplay is not crashing instead the corresponding DMA turns out to be in red color and acquisition stops.