Posts by IhShin

Hi Kevin,

Thank you for your support.

Best regards.

Hi Kevin,

I have one more question.

If so, is it normal for "7" to be output to the variable after FG_Init() is executed?

Thanks

Best Regards,

Hi,

I want to know how the "FG_CAMSTATUS_EXTENDED" variable changes.

When tested using Basler Camera, the variable is output as 7 after Fg_Init() is executed. However, if you are using a third-party camera, it will output as 1 or 2.

** environment of use

-. Frame Grabber: mE5-VCL

-. Applet: Acq_SingleFullAreaGray .dll

Thanks

Best Regards,

Hello,

After enabling the "Ignore cam clock state" item in "microDisplay-settings", the issue was resolved.

pasted-from-clipboard.png

Thank you.

Hello,

The simulation works fine. As in the attached image, VA files built after design do not work on microDisplay. So, we inquired how to output the image data acquired by one camera in the mE5 VQ8-CXP6D to two DMAs.

Thank you.

Hello,

Using the mE5 VQ8-CXP6D and one camera, I want to output the original image to one DMA and the binarized image to the other DMA. It does not work if it is designed as in the image below. Is there any other way?

pasted-from-clipboard.png

thanks.

Dear CarmenZ,

Thank you for your reply.

I will contact the local sales contact.

Dear CarmenZ,

VisualApplets license features currently in use include VA Core and VA Gui. The protection option is active in VisualApplets 2.1.1 version, but not in VisualApplets 3.3.0 version.

thanks.

Hello,

I tried to protect the user library element by referring to the link below, but I don't see the Protection option.

https://docs.baslerweb.com/vis…ntent/user_libraries.html

Has the ability to activate user library protection options disappeared?

- Visual Applet Version: 3.3.0

thanks.

Dear CarmenZ,

Thank you for your reply.

Thanks.

Hello,

When I change the platform in the DistortionCorrection example to "microEnable 5 ironman VD8-PoCL" or "microEnable IV VQ4-GE", I get an error in the "FrameBufferRandomRead" operator in the "Buffer" HierarchicalBox.

The attached applet file is the changed file for the "microEnable 5 ironman VD8-PoCL" platform.

Can you give me a solution to this problem?

thanks.

Hi Johannes,

Thank you for your support.

I simulated the attached applet as a raw image and it works fine.

Thanks.

Best regards.

Hi,

I'm designing a applet to use the line scan camera(AviiVA EM4).

- Camera: AViiVA EM4 CL Line Scan Camera (4tap, 8bit)

- Frame Grabber: microEnable5 VCL

- Image Size: 4096x768

** Tap structure for camera

AViiVA EM4_Tap structure.JPG

If the tap geometry for camera is 2X2E, please check whether the Applet I designed is properly designed.

In addition, can you provide an image acquisition applet for line scan camera using 2X2E tab geometry?

thanks.

Dear B.Ru,

If you check the operation at a low frame rate, it operates normally up to 96Hz.

target bandwidth:

Width * Height * BitPerPixel * Frequency

-> 2000 x 2000 x 8 x 239 = 912MB/s

If the RAM approach of EDoF calculation is 2 RAM module and the parallelism of the process is changed to 16, the build does not work for a long time.

Thanks.

pasted-from-clipboard.png

Hi.

I am designing a DepthFromFocus example to be applied to VQ8-CXP6D, but the designed applet has a buffer overflow in the microDisplay. The maximum frame rate of the camera is 239 fps. but, overflow occurs at 96 fps or higher.

Please check the problem in the designed applet.

* Test environment

- Camera: Adimac S-25A70

- Fram Grabber: microEnable 5 VQ8-CXP6D

- Image ROI: 2000x2000 @8Bit(mono8)

Thanks.